Rfid vibration countdown bracelets for amusement park
The RFID countdown reminder wristband is seamlessly integrated with the access control system of each amusement park, providing a convenient and fast monitoring method for venue managers, effectively assisting them in managing visitor flow and safety in a busy venue environment. In addition, the product adopts an IP68 waterproof design, which can adapt to the use requirements in different environments and has good durability and stability.
Product Description
|
Countdown time setting |
In increments of minutes or half an hour, up to 24 hours |
|
Timeout timing |
Countdown ends 30 seconds later, timeout starts, up to 60 minutes |
|
Vibration reminder |
Vibration motor reminder |
|
LED screen display |
Press the screen button to light up and check the remaining time |
|
RFID working frequency |
13.56Mhz |
| Rfid chip capacity |
1K Byte |
| Wristband dimension |
18*47*240mm |
| Battery capacity |
55mAh |
|
Battery charging method |
Magnetic charging |
|
Battery charge voltage |
DC5.0V |
|
Charging time |
60 minutes |
|
Battery type |
Polymer Lithium Ion Battery |
| Standby time |
>100 hours |
| Working hours |
24 hours |
| Strap |
TPE material (other stretch knit, silicone, and two-tone color straps are available) |
Product Show
RFID Countdown Time Reminder Wristband Time Tracker
Wristband Function
1. Click to increase/decrease 1 minute, press to increase/decrease 30 minutes
2. Confirm the time and write the countdown time into the wristband
3. The wristband displays the setting countdown time, the green light flashes, then countdown time begins.
4. Turn off the screen, power saving.
5. Touch the screen to display the remaining countdown time
6. RFID access control
7. 5 minutes left, the wristband vibrates 3 times to remind.
8. The countdown time ends, the wristband vibrates continuously for 10 seconds to remind.
9. Enter the timeout reminder after 30 seconds
10. Vibrate 3 times after 55 minutes of timeout
11. Vibrate continuously 6 seconds after 60 minutes of timeout and end the work
12. USB interface, magnetic charging.
