Customized Silicone HF RFID Countdown Time Reminder Wristband for Indoor Activities
Imagine being able to set a countdown and receive a gentle reminder when time is running out. Whether you're racing against the clock in thrilling indoor trampoline games, exploring adrenaline-pumping amusement parks, engaging in indoor or outdoor activities, or managing access control systems, Meihe RFID countdown time reminder bracelet has got your back.
Equipped with an LED screen, this wristband ensures that you have quick and easy access to the remaining time. Simply press a button and the LED screen lights up to view the remaining time.
Product highlights
●Countdown time reminder ●vibration reminder
●timeout timing ●LED screen display，
●RFID ● rechargeable
● long time standby ●multiple straps to choose
Product Description
Countdown time setting: In increments of minutes or half an hour, up to 24 hours
Timeout timing : Countdown ends 30 seconds later, timeout starts, up to 60 minutes
Vibration reminder : Vibration motor reminder
LED screen display: Press the screen button to light up and check the remaining time
RFID chip capacity : 1K Byte
RFID working frequency :13.56Mhz
Battery charging method : Magnetic charging
Battery charge voltage: DC5.0V
Charging time: 60 minutes
Battery type : Polymer Lithium Ion Battery
Battery capacity: 55mAh
Standby time: >100 hours
Working hours : 24 hours
Wristband strap material : TPU material (Elastic and other straps are available)
Product Display
Wristband Functional Operation
◆Countdown time setting
The countdown time can be set by the special time setter.In increments of minutes or half an hour, up to 24 hours.
◆Normal operation
When the wristband connects and induces time setter, the countdown time setting is completed and the countdown begins. Before the countdown time ends, if the wristbands accidentally induce the time setter again, the countdown time will not be affected (except for the reset instruction).
◆Countdown time suspend
If you want to stop the countdown time midway, you can use time setter to reset it, or connect the charging cable to charge and stop the countdown time.
◆LED screen display
During countdown time working, the green indicator light flashes slowly. Press the screen button to light up the display to check the remaining time. 30 seconds after the countdown ends, the timeout timer starts, red light flashes, and press the screen to light up the display to check the timeout time. After 1 hour of timeout, the bracelet stops working and the display goes off.
◆Vibration reminder
5 minutes before the countdown time ends, the wristband vibrates 3 times as a reminder, and when countdown time ends, the motor vibrates for 6 seconds as a reminder. When the timeout is 55 minutes, the wrsitband vibrates 3 times as a reminder, and when the timeout is 60 minutes, the wristband continues to vibrate 6 seconds as a reminder.
◆Low battery reminder
When the battery power is less than 20%, the red and green indicator lights will flash alternately.
◆Charging instructions
The red indicator light is on when charging, and the green light is on when fully charged.
◆System reset
If an abnormal situation occurs, you can reset the system by connecting the charging cable to charge.
