RFID windshield tag is designed for automatic vehicle identification applications (such as electronic toll collection, electronic vehicle registration or parking, security access and fleet management), it offers a much more convenience in vehicle management system. With several years of business experiences, meihe has a good knowledge of customers’ needs.

Using EPC Gen 2 (ISO18000-6C) compatible RFID inlay chip Alien Higgs-3-ALN-9654 as a standard, RFID windshield tag provides a read range of approximately 18+ feet. The inlay inside is encapsulated between thin layers of paper. Custom printing options is available on the adhesive layer. And it is tamper evident with strategically placed slits on the tag.

Size and material available

Standard size: 110*45mm; 110*40mm; 110*36mm; 105*55mm; 110*68mm; 100*40mm.

Standard material: Paper

Custom size or request on material is available.

Printing

CMYK offset printing.

Both sides are ok. Normally, it will print on adhesive layer which is visible to somebody outside the car.

Standard chip Alien Higgs-3-ALN-9654 features

Using EPC Gen 2 (ISO18000-6C) compatible RFID inlay chip Alien Higgs-3-ALN-9654 as a standard, RFID windshield tag provides a read range of approximately 18+ feet. The inlay inside is encapsulated between thin layers of paper. Custom printing options are available on the adhesive layer. And it has tampered evident with strategically placed slits on the tag.

› Exceptional performance

› EPC Gen 2 (v1.2.0) compliant

› ISO/IEC 18000-6C compliant

› Worldwide RFID UHF operation (840-960MHz)

› Higgs™-3 IC with 800-bits of Nonvolatile Memory

– 32-bit TID

– 64-bit Unique TID

– 96-bit EPC Memory, extensible to 480-bits

– 512-bit User Memory

– 32-bit Access password

– 32-bit Kill password

› Pre-programmed with a unique, unalterable 64-bit serial number (ideal for authentication)

› User Memory can be Block Perma-Locked

› User Memory can be Read Password protected in 64-bit blocks, prohibiting unintended Reads without an access password

› Supports all Mandatory and Optional Gen 2 commands including item level commands

› Custom commands for high speed programming

› Available in high-yield, high-capacity dry/wet inlay rolls for high volume converting processes

Operating temperature

Storage Limits: -13°F to 122°F [-25°C to +50°C]

Operating Limits: -40°F to +158°F [-40°C to +70°C]

Printing effect:

Meihe understands Printing is key issue to meet client’s satisfactions. Therefore Meihe prints products strictly according to client’s layout. Keeping the consistency between printing effect and approved layout is always the priority to Meihe.

More Info,please kindly visit:www.rfidcardfactory.com and send email to sales@mhgyjs.com.