PVC card design knowledge   2019-01-21
Before you can make a card, you must have a computer designed manuscript. The computer design manuscript contains everything you want to print on the card. There are two ways to get the design draft:
1. Designed for us by us
We will design the manuscript according to your requirements, including the image, text layout and logo, until you are satisfied.

2, you are ready to design the manuscript
If you have already designed the manuscript, you can send it directly to us. We accept design drafts in the following formats:

Output software
 File format 
Resolution 
Color mode
 CorelDraw  *.cdr 
300 resolution or above
CMYK
 Photoshop  *.psd 
 Illustrator  *.ai 
 Adobe Acrobat  *.pdf 
 EPS  *.eps 
 Freehand  *.fh11 
 Tiff  *.tif 
 

Separation line

Please pay attention to the points when designing the manuscript:
1. If there is a base map on the entire card surface, there must be a bleeding position, and the bleeding position will be cut off when punching.
The standard size of the card is 85.5mm × 54mm, and the size including the bleeding position is 88.5mm × 57mm.
2. Please turn all the text content into a curve, otherwise the content may be missing during production.
3. The file format is preferably CORLDRAW9.0 and the color mode is CMYK.
4. The color of the shading or basemap should not be lower than 8%, so as not to be able to be displayed when the finished product is printed.
5, the thickness of the offset line can not be less than 0.076, otherwise the printed lines are not clear.
6. If you encounter other problems that you don't understand, please contact us in time!Thanks.

    share to :

New Products
  • RFID rubber wristband

    Rainbow silicone rubber waterproof wristband watch rfid cartoon silicone band wristband

    RFID NFC silicone rfid sililcone wristband is suited for the beach, pools, waterparks, spas, gyms, sports clubs and any other RFID access control applications where a waterproof nfc bracelet is required. Silicone NFC bracelets are IP68 waterproof, durable, eco friendly, heat resistance, and anti-allergy. All our silicone nfc wristbands are available with 125 KHz LF, 13.56 MHz HF and UHF ICs. Widely used in door access control, member management, payment tracking, pet/lost tracking etc. Custom wristband color, custom LOGO printing all available for our nfc silicone wristband bracelet. Craft options like unique QR code, serial number, barcode, embossed, debossed, laser printing etc all accepted for nfc silicone wristband bracelet.

  • Rfid Bluetooth Wristband

    Waterproof Bluetooth Smart Watch With Dual NFC Chips

    Waterproof Bluetooth Smart Watch  is embedded  With Dual NFC Chips,with low and high frequency bands.The Frequency band are 12-14MHZ and 125KHZ respectively ,which are both conformed to ISO 14443A protocol standards.The NFC Chips have rewritable properties,the sensor area is placed in the bracelet surface,with 1-5 cm read/write range (dual to different reader/writer,the read range is varied).

  • NFC Coin PVC Tag

    ISO15693 / ISO14443A 13.56Mhz NFC RFID PVC Coin Card Tag

    Coin tags can be used in various applications, such as tokens in vending machines or for identifying objects. They can be further personalized by full color printing with a logo, a number or any other graphics of your choice.

  • Anti-metal rfid coin tag

    HF adhesive Anti-metal NFC PVC Hard coin Tag

    RFID anti-metal tags is also known as on metal RFID tag or RFID tag for metal, anti metal RFID label, metal adhesive RFID label. It is made of special rubber magnetic sticky film and electronic tag on its back side. This type of tag technically successfully solves the issue of unable to read the RFID when it is attached to a metal surface. RFID anti-metal tag is also known as metal RFID tag, anti metal RFID label, metal adhesive RFID label. It is made of special rubber magnetic sticky film and electronic tag on its back side. This type of tag technically successfully solves the issue of unable to read the RFID when it is attached to a metal surface.

Copyright © Shenzhen Meihe Induction Technology Co. Ltd. all rights reserved. powered by dyyseo.com / Sitemap / XML

welcome to Meihe
If you have any questions or requirements,please leave us a message,we will reply you in 1 hours during our working time. Contact us for free samples and free suggestions.
   

Home

products

about

contact